Teraflex HD Chromoly Tie Rod Kit for 2018-2026 Wrangler JL and 2020-2026 Gladiator JT

Teraflex HD Chromoly Tie Rod Kit for 2018-2026 Wrangler JL and 2020-2026 Gladiator JTThe TeraFlex JL / JT: HD Chromoly Tie Rod Kit withstands extreme conditions and abuse that typically causes factory steering components to bend and fail on lifted JL Wrangler/Unlimited and JT Gladiator models. The vague and unpredictable OEM steering leaves much to be desired. Our HD Chromoly Tie Rod Kit beefs up the steering on all JL and JT models, including stock and lifted vehicles. A must for anyone who takes their rig off road! Fits:JL Wrangler (2-door)JL Wrangler Unlimited (4-door)JT Gladiator (pickup)Dana 30 front axleDana 44 front axleTera60 Front Axle0-6″ LiftIncludes:HD Chromoly Tie RodSteering Stabilizer Relocation BracketAll necessary hardwareFeatures & Benefits:Installation does not require any cutting or removal of factory bracketryHD 42mm O.D. x 7mm wall 4140 heat treated chromoly steelMore than 66% stronger and 75% stiffer than factory tie rodAdjustable length from 59″ to 61″Same forged threaded ends as JK Wrangler/UnlimitedTie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housingFeatures adjustable rod end preload tension to ensure long-term durabilityThe joint is pressed into the rod end forging and secured w/ a snap ringOne tie rod end joint rotation is limited to 2 degrees of freedom to eliminate wobble and noise, while the other joint has full motion to allow for full turningFeatures greaseable joints coated w/ magnesium phosphateTie rod is UV protected triple-stage powder coat for corrosion resistancePremium black e-dipped coating on tie rod end forgings provide superior durability and corrosion resistanceProvides clearance for factory 17″ wheelsCompatible w/ all TeraFlex components including HD Forged Adjustable Front Track Bar, Delta Brake System, Falcon Steering Stabilizers, differential covers, and 3.5″ O.D. axle housing tubesRelocates steering stabilizer above tie rod to help reduce damage to the stabilizer shaft or bodyNote(s):OEM and Falcon Nexus EF Steering Stabilizers require a minimum of 2″ bump stops. Falcon 1.1 Steering Stabilizer requires a minimum of 2.5″ bump stop.Related:JL / JT: HD Chromoly Tie Rod Kit (0-6″ Lift) (# 1863910)JL / JT: HD Forged Drag Link Kit (0-6″ Lift) (# 1863920)Item # 1863910